PF40 Kit
by IQAir
Compatibility
Compatible with all IQAir filtration devices. Not compatible with the accessories FlexVac, VM FlexVac, VM InFlow and InFlow W125.
Notes
Each IQAir filtration device features a fine dust pre-filter. For environments with elevated levels of coarse dust, the PF40 kit can be added for superior coarse dust filtration. This helps to extend the life of the unit's standard pre-filter element.
Quick to install, the PF40 kit consists of an upper grille which screws into the filtration device's base. A synthetic coarse dust filter pad is held in place by a lower grille that is secured by four clips. The 1/2 inch deep non-woven design of the PF40 filter pad ensures superior coarse dust holding capacity.
The filter pad may be washed several times before it needs to be replaced.
The indoor air quality (IAQ) improvements that can be achieved with IQAir units depend not only on the system performance, but also on factors which are specific to the indoor environment, such as room size, type and concentration of contaminants and source intensity. Consult a qualified IAQ specialist to determine an effective and comprehensive IAQ strategy. Source control and ventilation should be considered first in solving any IAQ problem.
Quick to install, the PF40 kit consists of an upper grille which screws into the filtration device's base. A synthetic coarse dust filter pad is held in place by a lower grille that is secured by four clips. The 1/2 inch deep non-woven design of the PF40 filter pad ensures superior coarse dust holding capacity.
The filter pad may be washed several times before it needs to be replaced.
The indoor air quality (IAQ) improvements that can be achieved with IQAir units depend not only on the system performance, but also on factors which are specific to the indoor environment, such as room size, type and concentration of contaminants and source intensity. Consult a qualified IAQ specialist to determine an effective and comprehensive IAQ strategy. Source control and ventilation should be considered first in solving any IAQ problem.
Installation
The PF40 kit consists of an upper grille which screws into the filtration device's base. A synthetic coarse dust filter pad is held in place by a lower grille that is secured by four clips. The 1/2 inch deep non-woven design of the PF40 filter pad ensures superior coarse dust holding capacity.
The filter pad may be washed several times before it needs to be replaced.
The filter pad may be washed several times before it needs to be replaced.
View Sales Sheet
There are no reviews for this product, yet.
back to top
| About Us | | | Contact Us | | | Shipping Policy | | | Return Policy | | | Sitemap |
sitemap +