Emission Control
Legislation limits the emission of polluted air to the outdoors. The OutFlow W125 filters air before it is exhausted outdoors to help meet environmental emission standards.

Isolation Areas
Infection control (e.g. tuberculosis) in hospitals and similar facilities demands the creation of negative pressure environments to reduce the spread of airborne microorganisms. The OutFlow W125 permits operation of the filter unit from within the isolation area, eliminating the danger of housing leakage into the surrounding area.

The OutFlow W125 kit easily modifies any IQAir filtration unit. Simply replace the top module of any standard IQAir filtration unit with the TopFlow adapter. All that is needed to install the ducting, wall tube and vent is a 5.2 inches opening in a wall or window. The OutFlow W125 kit also includes a damper and a protective mesh grille which prevents backdrafts and entry of coarse particles when the system is not in use. The large 5 inches diameter of the ducting ensures low air resistance.

The aluminum duct may be freely flexed to allow control over the desired vent location. It is expandable in length from 10 inches in its original compressed state to 39 inches when fully extended.

Creation of Pressure Differentials
The OutFlow W125 lets you create pressure differentials between different indoor areas. Negative pressure serves to contain pollutants in an isolation area. Positive pressure protects a clean environment from uncontrolled infiltration of airborne contaminants from polluted areas.

Emission Control
With the OutFlow W125 your IQAir ® filtration device can be used for emission control. Air is filtered and expelled outdoors via a flexible ducting system. The negative pressure area that is created prevents unfiltered indoor air from leaking outdoors.

The OutFlow Wl 25 kit allows filtered air from any IQAir filtration device to be directed through a wall or window vent. The OutFlow W 125 kit can be used to create a clean area, to deliver filtered air into a clean room or to the outside, as well as create under pressure or over-pressure areas.

Clean Area & Cleanroom Use
The supply of filtered air into an environment helps reduce air pollution in that environment by dilution and the creation of over-pressure, which reduces the infiltration of polluted air from outside the environment. With the OutFlowWI25 kit, the filtration device is positioned outside the clean area or cleanroom, saving valuable space and reducing noise exposure. It also eliminates the danger of housing leakage, making it suitable even for certified cleanrooms.

Emission Control
Legislation limits the emission of polluted air to the outdoors. The OutFlow W 125 filters air before it is exhausted outdoors to help meet environmental emission standards.

Isolation Areas
Infection control (e.g. tuberculosis) in hospitals and similar facilities demands the creation of under pressure environments to reduce the spread of airborne microorganisms. The OutFlow W 125 permits operation of the filter unit from within the isolation area, eliminating the danger of housing leakage into the surrounding area.

The OutFlow W 125 kit easily modifies any IQAir filtration unit. Simply replace the top module of any standard IQAir filtration unit with the TopFlow adapter. All that is needed to install the ducting, wall tube and vent is a 5.2 inches opening in a wall or window. The OutFlow W 125 kit also includes a damper and a protective mesh grille which prevents backdrafts and entry of coarse particles when the system is not in use. The large 5 inches diameter of the ducting ensures low air resistance, typically reducing the air flow of an IQAir filtration unit by only 10-30 percent (depending on the specific model and fan speed).

The aluminum duct may be freely flexed to allow control over the desired vent location. It is expandable in length from 10 inches in its original compressed state to 39 inches when fully extended.

Compatible with all IQAir ® filtration devices and accessories.

The OutFlow W125 kit allows filtered air from any IQAir ® filtration device to be directed through a wall or window vent. The OutFlow W125 kit can be used to:

* Create clean areas
* Deliver filtered air into cleanrooms or to the outside
* Create negative pressure areas
* Create positive pressure areas

Technical Specifications

Hole Diameter
5.2 inches (132 mm)

Wall Tube Length:
4 inches (100 mm) and 6 inches (150 mm)

Flexible Aluminum Duct
5 inches (125 mm) diameter
Minimum bent radius: 10 inches (250 mm)
Adjustable length from 10 inches (250 mm) to 39 inches (1000 mm)

IQAir Compatibility
Compatible with all IQAir filteration units and devices.

210-20-00-20