Dental Hg FlexVac
by IQAir
Included
All systems come complete with filters, remote control, batteries (for remote control) owners manual, user guide video (both VHS and DVD), set of 4 casters, 10 foot power cord, and certificate of guaranteed performance.
Warranty
1 year on unit including fan motor, excluding filters
Filter Configuration
Average Filter Life
Pre-Filter 6-18 months, Gas phase filter: 1-3 years, Post filter 1-3 years
Product Dimensions
H 28 inches x W 15 inches x D 16 inches
Information
Source control of drill aerosols, mercury vapor, and microbiological contaminants.
Other Information
Customized Pollution Control for Dental Offices
The IQAir ® Dental Hg FlexVac is a mobile air cleaning system with a flexible suction arm. It is designed to capture drill aerosols, abrasion powder and mercury vapors during dental procedures. The pollutants are captured by a flexible suction duct before they can spread to other areas in the room.
The IQAir Dental Series units are based on the IQAir GC design and contain filter cartridges, which optimize them for the pollutants found in dental offices. The post filter is electrostatically charged to trap particulate pollutants and microorganisms (bacteria and viruses). The neutral white and light grey design integrate perfectly in all dental offices.
The IQAir ® Dental Hg FlexVac is a mobile air cleaning system with a flexible suction arm. It is designed to capture drill aerosols, abrasion powder and mercury vapors during dental procedures. The pollutants are captured by a flexible suction duct before they can spread to other areas in the room.
The IQAir Dental Series units are based on the IQAir GC design and contain filter cartridges, which optimize them for the pollutants found in dental offices. The post filter is electrostatically charged to trap particulate pollutants and microorganisms (bacteria and viruses). The neutral white and light grey design integrate perfectly in all dental offices.
Notes
The IQAir Dental Series units are based on the IQAir GC design and contain filter cartridges, which optimize them for the pollutants found in dental offices. The post filter is electrostatically charged to trap particulate pollutants and microorganisms (bacteria and viruses). The neutral white and light grey design integrate perfectly in all dental offices.
Applications
* Drill aerosol control
* Microorganism control
*Mercury vapor
*Disinfectant control
* Microorganism control
*Mercury vapor
*Disinfectant control
Suggestions
For more critical control of gaseous compounds see our GC ™ Series models.
1. User Control Panel
2. Carrying Handle
3. No-Draft Diffuser
4. Particle Post-Filter Sleeves
5. Gas and Odor Filter Cartridges
6. Snap-Open Locking Arms
7. High-Performance Centrifugal Fan
8. Advanced Fan Control
9. Pre-Max Pre-Filter (Class H11)
10. Dual Floor Air Intake
2. Carrying Handle
3. No-Draft Diffuser
4. Particle Post-Filter Sleeves
5. Gas and Odor Filter Cartridges
6. Snap-Open Locking Arms
7. High-Performance Centrifugal Fan
8. Advanced Fan Control
9. Pre-Max Pre-Filter (Class H11)
10. Dual Floor Air Intake
Maximum Coverage Area
900 sq ft (based on maximum fan speed and an 8.5 ft ceiling)
Flow Rate
With New Filters Installed:
Speed 1 - 35 cfm
Speed 2 - 60 cfm
Speed 3 - 95 cfm
Speed 4 - 125 cfm
Speed 5 - 150 cfm
Speed 6 - 250 cfm
Speed 1 - 35 cfm
Speed 2 - 60 cfm
Speed 3 - 95 cfm
Speed 4 - 125 cfm
Speed 5 - 150 cfm
Speed 6 - 250 cfm
Number of Fan Speeds
6
Net Weight (including filters)
51 lbs
System Efficiency for Particles
99 percent or more for 0.3 microns
99 percent for total particle count
99 percent for total particle count
Power Requirements
120 V, 215 Watts, 50-60 Hz. The entire electrical system is UL certified.
Energy Consumption (Max)
215 W
Power Cable
Grounded Detachable 10 foot
Pre-Filter Surface Area
25 sq. ft.
Gas Phase Filter
Approx. 5.5 lbs of impregnated activated carbon. 2.25 lbs each of activated carbon chemis.
Post Filter Sleeve
98 percent DOP (0.3 microns) electrostatic media
Number of Housing Modules
6
Housing Material
PC-ABS (fire resistant) and ABS (UV-stabilized) non-offgasing, high impact resistant
Color of Main Housing and Arms
Light Gray/White
Air Intake
Two side openings at base of unit
Air Outlet
Via diffuser with horizontal 320 degree opening on top of unit
Fan Motor/Type
Centrifugal fan, backward curved, single inlet
Bearings
Maintenance-free steel ball bearings
Speed Regulation
Voltage reductions via capacitor switching
Ratings
UL/CSA registered
Control Panel Design
4 key touch pad, 32 character LCD display
Polyester overlay panel
Polyester overlay panel
Control Panel Features
Liquid crystal display, 16 character x 2 line
Timer Status LED, Filter Life Status LEDs, Fan Speed Indicator LEDs
Timer Status LED, Filter Life Status LEDs, Fan Speed Indicator LEDs
Display Languages
English, French, German, Italian, Spanish
Product Sku
1DA-UA0-IGU
There are no reviews for this product, yet.
back to top
| About Us | | | Contact Us | | | Shipping Policy | | | Return Policy | | | Sitemap |
sitemap +