A Medwing.com Website Dedicated to IQAir Products
Dental Hg FlexVac
Dental Hg FlexVac by IQAir
Direct Elimination of Dental Air Contaminants |
|||||||||||
 |
 |
Email This Page to a Friend Back to: "Air Purifiers and Filters - IQAir" Category |
|||||||||
|
Description
* Free Ground Shipping on every order. Free 2nd Day Air available for all Air Purifiers. |
Additional Information |
||
| Included: | All systems come complete with filters, remote control, batteries (for remote control) owners manual, user guide video (both VHS and DVD), set of 4 casters, 10 foot power cord, and certificate of guaranteed performance. | |
| Warranty: | 1 year on unit including fan motor, excluding filters | |
| Filter Configuration: | 1 - Pre-Filter (HEPA type) - (F1) 1 (set of 4) - Gas Cartridge (F2) 1 (set of 4) - Post Filter Sleeves (F3) |
|
| Average Filter Life: | Pre-Filter 6-18 months, Gas phase filter: 1-3 years, Post filter 1-3 years | |
| Product Dimensions: | H 28 inches x W 15 inches x D 16 inches | |
| Information: | Source control of drill aerosols, mercury vapor, and microbiological contaminants. | |
| Other Information: | Customized Pollution Control for Dental Offices The IQAir ® Dental Hg FlexVac is a mobile air cleaning system with a flexible suction arm. It is designed to capture drill aerosols, abrasion powder and mercury vapors during dental procedures. The pollutants are captured by a flexible suction duct before they can spread to other areas in the room. The IQAir Dental Series units are based on the IQAir GC design and contain filter cartridges, which optimize them for the pollutants found in dental offices. The post filter is electrostatically charged to trap particulate pollutants and microorganisms (bacteria and viruses). The neutral white and light grey design integrate perfectly in all dental offices. |
|
| Notes: | The IQAir Dental Series units are based on the IQAir GC design and contain filter cartridges, which optimize them for the pollutants found in dental offices. The post filter is electrostatically charged to trap particulate pollutants and microorganisms (bacteria and viruses). The neutral white and light grey design integrate perfectly in all dental offices. | |
| Applications: | * Drill aerosol control * Microorganism control *Mercury vapor *Disinfectant control |
|
| Suggestions: | For more critical control of gaseous compounds see our GC ™ Series models. | |
| Specifications: | 1. User Control Panel 2. Carrying Handle 3. No-Draft Diffuser 4. Particle Post-Filter Sleeves 5. Gas and Odor Filter Cartridges 6. Snap-Open Locking Arms 7. High-Performance Centrifugal Fan 8. Advanced Fan Control 9. Pre-Max Pre-Filter (Class H11) 10. Dual Floor Air Intake |
|
| Maximum Coverage Area: | 900 sq ft (based on maximum fan speed and an 8.5 ft ceiling) | |
| Flow Rate: | With New Filters Installed: Speed 1 - 35 cfm Speed 2 - 60 cfm Speed 3 - 95 cfm Speed 4 - 125 cfm Speed 5 - 150 cfm Speed 6 - 250 cfm |
|
| Number of Fan Speeds: | 6 | |
| Net Weight (including filters): | 51 lbs | |
| System Efficiency for Particles: | 99 percent or more for 0.3 microns 99 percent for total particle count |
|
| Power Requirements: | 120 V, 215 Watts, 50-60 Hz. The entire electrical system is UL certified. | |
| Energy Consumption (Max): | 215 W | |
| Power Cable: | Grounded Detachable 10 foot | |
| Pre-Filter Surface Area: | 25 sq. ft. | |
| Gas Phase Filter: | Approx. 5.5 lbs of impregnated activated carbon. 2.25 lbs each of activated carbon chemis. | |
| Post Filter Sleeve: | 98 percent DOP (0.3 microns) electrostatic media | |
| Number of Housing Modules: | 6 | |
| Housing Material: | PC-ABS (fire resistant) and ABS (UV-stabilized) non-offgasing, high impact resistant | |
|
